Skip to main content
Editing Step 2 —

Step Type:

Drag to rearrange

Cut 40 segments of LED strips, 14 LED's long.

Don't cut off too much of the pads on the ends! We need to solder to it!

Cut 40 segments of aluminum extrusion, 25cm each. Deburr the ends so they don't cut into the strips!

Cut 40 segments of diffuser plastic, 23cm each.

The diffusers should be shorter than the aluminum, or they'll be difficult to snap onto the extrusion after the system is assembled.

Your contributions are licensed under the open source Creative Commons license.