You're viewing a previously published revision of this guide. View latest revision

May 03, 2021 - 03:05:13

Oct 11, 2021 - 03:10:55 Oct 04, 2021 - 03:10:41 Sep 25, 2021 - 02:09:52 Sep 25, 2021 - 02:09:38 Sep 25, 2021 - 02:09:34 Sep 25, 2021 - 02:09:06 Sep 12, 2021 - 05:09:19 Jul 07, 2021 - 08:07:41 Jun 09, 2021 - 07:06:52 Jun 09, 2021 - 07:06:59 Jun 09, 2021 - 07:06:37 Jun 09, 2021 - 07:06:39 May 14, 2021 - 01:05:20 May 13, 2021 - 10:05:54 May 03, 2021 - 05:05:49 May 03, 2021 - 05:05:31 May 03, 2021 - 05:05:24 May 03, 2021 - 05:05:13 May 03, 2021 - 05:05:52 May 03, 2021 - 05:05:39 May 03, 2021 - 05:05:28 May 03, 2021 - 05:05:35 May 03, 2021 - 04:05:16 May 03, 2021 - 04:05:51 May 03, 2021 - 04:05:11 May 03, 2021 - 04:05:02 May 03, 2021 - 04:05:37 May 03, 2021 - 04:05:25 May 03, 2021 - 04:05:08 May 03, 2021 - 04:05:32 May 03, 2021 - 04:05:57 May 03, 2021 - 04:05:29 May 03, 2021 - 04:05:48 May 03, 2021 - 04:05:42 May 03, 2021 - 04:05:08 May 03, 2021 - 03:05:13 May 03, 2021 - 03:05:41

Newer

Chromance Assembly Instructions

Written By: Zack Freedman (and 3 other contributors)

Comments: 62
Favorites: 5
Completions: 15

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Start Printing

Print the following:
1x TopLeftNode.stl
1x TopRightNode.stl
3x TopCenterNode.stl
20x RegularNode.stl
I used carbon fiber PLA. Nail that first layer - it's what people will see.
The Top nodes must be printed with supports everywhere. The Regular nodes do not need supports.